CO2 industrial gas detector
gas safety solution for industries
overview
PLEASE NOTE: For proper installation of the ESCM-900 or ESCM-902 industrial gas detectors, the device must be hard-wired, and a ESCM-900-CBL OR ESCM-900-CON MUST be purchased with this device.
The ESCM-900: CO2 Industrial Fixed Gas Detector is a gas safety solution for industries that need to measure up to 5% carbon dioxide levels to mitigate potential hazards. This device also includes an IP64 industrial enclosure specifically for harsh environments or where washdown is required.
features
- Fast and Precise CO2 measurements - monitors 0-5%
- Gain instant audible or visual alarms for potential leaks
- Users configurable 3-relays dependent upon application
- Meets all NFPA, IFC, and NBIC CO2 Safety Code Requirements
- 4-20mA output to communicate with (BMS) Building Management Systems
models
ESCM-900 - CO2 Industrial Gas Detector
ESCM-902 - O2 Industrial Gas Detector
warranty
1-year warranty
specifications
| features | specitications |
|---|---|
| CO2 Measurement Range | 0-5% (50,000ppm) |
| Display Resolution | 10ppm at 0~10,000ppm |
| Accuracy | +/-200ppm or +/-10% reading |
| Pressure Dependence | built in barometer (50 to 110 kPa) |
| Response Time | CO2: <2min by 90% |
| Alarms | 5,000 ppm TWA, 5,000ppm, 3% CO2 (configurable) |
| Alarm Relays | 3 |
| Alarm Response Time | < 60 seconds |
| Sound Alarm | 80db@10cm |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Warm-Up Time | <60 seconds at 22°C |
| Calibration | Manual with test gas or factory calibration |
| Dimensions | 8.25 in x 6.25 in x 3 in 210 mm x 159 mm x 76 mm |
| Weight | 1.5 lbs (monitor only) 0.68 kgs (monitor only) |
| Sensor Life Expectancy | >15 years |
| Electrical | |
| Power Input | 9~32VDC (12~24VDC recommended), 2A. |
| Power Consumption | 3 Watts |
| Ingress Protection | IP64 |
| 6 VDC battery backup connections | |
| Relays | Peak Current < 2A @ 30VDC or 250VAC, SPDT |
| Relay Color Coding | Red & White = Normally Open Blue & White = Normally Closed |